| Home | Imprint / Disclaimer | Contact | Dealer-Login | Sitemap Dental |
Technical changes and errors excepted. Minor color variations are subject to typography.

Special motor Automatic matching Max. speed in approx. 1 second Ax. torque preselectable; acoustic signal on reaching 90%; cut-out at 100% 1000 sterilization cycles without maintenance Open system (no closure of the motor for sterilization) Intelligent motor control Speed: 300 - 40,000 rpm. Torque: 300 - 12,000 rpm at 5.5 Ncm. Max. torque 12,000 - 40,000 rpm at 2.0 - 5.5 Ncm. Reduced torque when not necessary and therefore less heating of the motor and less stress on the bone. Internal coolant tubing No inconvenient manipulation Very flexible Easily changeable Sterilizable; sterile disposable tube fittings available Technical data Unit   Weight 6.9 kg Size 31 x 23 x 12,5 cm Input voltage 100 V; 120 V; 230 V 50/60 Hz Irrigation function Motor is switched off, only the pump runs Display in standby state Speed range; motor direction; gear step-down of the instrument; max. torque; pump power (0...6) Display during use Actual speed, actual torque Foot control Motor on/off; Speed (min. - max.); Clockwise/counterclockwise operation; Pump on/off; Irrigation function; Switch on program; Select program step (forwards/back)   INTRA-LUX SL 550 motor   Technology Collectorless induction motor Motor speed Min. 300 rpm; Max. 40,000 rpm Torque 5,5 Ncm: 300 –12,000 rpm 5,0 – 2,0 Ncm: 12,000 – 40,000 rpm Output power 100 W Light 25,000 LUX   Software   Program 1 program with 6 steps Program functions Gear step-down of the instrument 1 2 to 1201 Max. speed 80,000 rpm Max. torque 5.5 to 55 Ncm Pump power 0 to 6 Motor direction Clockwise/counterclockwise Torque ax. torque preselectable; acoustic signal on reaching 90%; cut-out at 100% Speeds and torques in implantology Clinical procedure Speed (rpm) Max. torque required (Ncm) Smoothing the alveolar crest 1,000 - 1,500 5 - 10 Drilling the cavity 700 - 1,500 till 15 Thread cutting - Standard implants - Large diameter 10 - 50 10 - 50 till 35 till 50 Screwing in implant - Standard implants - Large diameter 10 - 50 10 - 50 till 35 till 50 Prosthetics 10 - 50 till 35 INTRAsurg 300 plus 11 - 1,500 till 55 All information at a glance Only 5 keys Unit can be operated completely using the foot control Key parameters - Max. torque - Max. speed - Coolant pump setting - Transfer ratio of the handpiece and contra-angle handpiece - Direction of motor rotation Incl. instrument recognition Optimum sterilization Motor, CL3-09 and tubes completely sterilizable Very easy and reliable The comprehensive solution for perfectly hygienic work Intuitive operation Actual speed/torque display All information at a glance Only 5 keys Instrument can be operated completely by foot control with IPX 8 Contra-angle handpiece INTRA LUX CL3-09 (with light) Total transmission 27:1 Surgery reducing head CL3 Transmission 3:1Cooling:: External and internal cooling (Kirschner and Meyer) Max. torque: 55 Ncm Surgery reducing shank CL09 Transmission 9:1 Max. operating speed: 11-1,500 rpm (mit INTRAsurg 300 plus) Light power: 25,000 Lux Wide range of use: from smoothing the alveolar crest to screwing in the implants. Provides sufficient speed and power for milling and drilling. At low speeds, always sufficient force for cutting threads and mounting implants. Convincing price/performance ratio. Very high load capacity. Improved vision of the operating area through 25% smaller diameter. Program with 6 steps Step Procedure Instrument Max. speed Torque Pump Motor direction 1. Milling and drilling the implant bed 27:1 1.500 55 Ncm 4 2. Cutting the thread 27:1 50 55 Ncm 3 3. Cutting instrument back 27:1 50 55 Ncm 3 4. Screwing in implant 27:1 50 55 Ncm 3 5. Removing the insertion post 27:1 50 55 Ncm 0 6. Mounting the closure cap 27:1 50 55 Ncm 0   The procedure for an implant operation is shown. For simplification, the essential parameters are specified but you can change them all individually. Surgical contra-angle handpiece INTRA LUX CL3-04 The fast implantology contra-angle handpiece CL 3-04 with a reduction ratio of 12:1. For implant systems with fast pilot drills up to 3,000 rpm. Features: Cooling: External and internal cooling (Kirschner and Meyer) Max. operating speed: 25 - 3,300 rpm Max. torque: 45 Ncm Light output: 25,000 Lux Automatic instrument recognition Optimum matching KaVo INTRAsurg 300 plus recognizes the three light instruments CL3-09, CL3-04 and CL10 immediately Whether you want to use the straight or the contra-angle handpiece - the right step-down ratio will be set immediately Surgery handpiece INTRA LUX CL 10 (with light) Total step-down ratio: 1:1 Cooling: External and internal cooling (Kirschner and Meyer) Max. torque: 10 Ncm Max. operating speed: 300-40,000 rpm (with INTRAsurg 300 plus) Light power: 25,000 lux Storage of the torque At the program level, you are mounting up to six implants in the program steps. With the maximum torque value automatically determined in each step, you can safely assess the primarily stability of the mounted implants. For each implant, you can decide when load can be applied. Manual level (display 1): All important settings at a glance - preparation made easy. Program level (display 2): Controlled screwing in of the implants. Program level (display 3): Display of the maximum torques for assessing the primary stability. Intelligent motor control Speed: 300 - 40,000 rpm Torque: 300 - 12,000 rpm at 5.5 Ncm Max. torque 12,000 - 40,000 rpm at 2.0 - 5.5 Ncm Reduced torque when not necessary and therefore less heating of the motor and less stress on the bone