Master Series Electric Handpieces

It's mostly a case of using your head

• KaVo offers the right head for almost any indication:
  prophylaxis, endodontics, surgery, etc.
• KaVo INTRA LUX heads fit on all KaVo GENTLEpower and INTRAmatic LH / CH contra-angle handpieces.
• KaVo safety fast-action chuck: all KaVo INTRA heads may be easily removed from the shank and exchanged, depending on the indications.
• Time-saving, material-conscious, flexible and economical: no unnecessary investment in inflexible, complete instruments. Only the head need be changed after many years of use - the shank remains.
• Small heads for good vision in the working area.
• All heads are sterilizable up to 135°C and thermally disinfectable.

67LH Reduction Latch Head - Operative

• for contra-angle handpiece drill
• 2:1 reduction
• maximum operating speed 20,000 rpm
• increased power
• with pushbutton clamping, dirt guard and strengthened chuck system
• remove carious material at recommended drill speed between 3000 and 20,000 rpm.
• REF 0540.8460

68LU Latch Head - Operative

• for contra-angle handpiece drills
• 1:1 transmission
• maximum operating speed 40,000 rpm
• with pushbutton clamping, dirt guard and strengthened chuck system
• for removing carious material
• REF 1003.7191

80LD Friction Grip Head - Operative

• for turbine drills of 1.6 mm diameter
• 1:1 transmission
• maximum operating speed 40,000 rpm
• with pushbutton clamp
• for finishing and prepolishing fillings
• REF 0540.1830

66LU Reduction Latch Head - Endodontics

• For Latch Type bur and Latch type endo files
• 3 : 1 reduction
• Drive speed max. 20,000 rpm
• Fill root canals with paste carrier, condense root canal filling materials, insert root pins gently
• Push-button chuck
• REF - 1004.4587

62LDN Reduction Latch Head - Endodontics

• for simple use of NiTi files
• 10:1 transmission
• maximum operating speed 2,000 rpm
• with pushbutton clamping for contra-angle shaft instruments
• fill root canals with paste carrier, condense root canal filling materials, insert root pins gently
• REF 0540.8310

31LR Reduction Prophy Head

• for snap-on and screw-type polishing attachments
• 2:1 reduction
• maximum operating speed 4,000 rpm
• thread and button. With multiple seal to prevent penetration of polishing paste.
• remove accretions, polish fillings and smooth the tooth surface, e.g. after powder jet or scaler treatment
• REF 0549.3380

Orthodontic / Periodontics / Endodontics 61LG LUX EVA PROFIN Head

• for freely rotatable files (use with Cavishape, Bevelshape, Proxoshape and Rootshape files)
• pleasant treatment with tissue protection thanks to the damped 0.8 mm stroke
• maximum operating speed 10,000 rpm
• use with slightly abrasive paste
• clean interdental cavities, eliminate excess filling materials, remove supra- and subgingival plaque and perform root smoothing
• REF 0549.3410

Orthodontic / Periodontics / Endodontics 61LRG LUX prepcontrol Head

• 36 positions for locking the polishing inserts (use with Cavishape, Bevelshape, Proxoshape and Rootshape files)
• gentle and efficient preparation thanks to damped 0.8 mm stroke
• maximum operating speed 20,000 rpm
• use with slightly abrasive paste
• REF 0549.3450

INTRA LUX Endo head 3 LDSY

• for hand root canal instruments with handle diameter 3.5 to 4 mm
• 0.4 mm range of movement
• force-absorbing adaptation to the resultant torsional resistances thanks to possibility of radial rotation through 360°
• maximum operating speed 3,000 rpm
• with pushbutton clamping
• preparation of root canals
• REF 0549.3750

3LD Reduction Head - Endodontics

• speed max 3,000rpm
• drive speed is converted into an oscillating movement of about 90°

• to be used with hand NiTi files
  
• push-button chuck
• use with KaVo 29LP shank
  
• REF 0549.3720

3LDSY Reduction Head - Endodontics

• speed max 3,000rpm
• drive speed is converted into a stroke movement of about 0.4mm
  

• to be used with hand NiTi files
  
• push-button chuck
• use with KaVo 29LP shank
  
• REF 0549.3750